How To Apply Thompson's Water Seal
How To Apply Thompson's Water Seal. Give the surface a scrub with a stiff bristle brush. Thomsons water seal lasts about 6 months on brick.
When using it as a concrete curing agent, apply it at the rate of 1 gallon per 200 square feet. When applying it to a vertical surface, start at the bottom and work upward. If water absorbs and darkens color of surface within five seconds, surface is porous and considered ready to be treated.
Remember That A Little Bit Goes A Long Way.
How long does thompson’s water seal last on brick? Can't get your pump garden sprayer to spray deck sealer, like thompson water sealer? Although, if you read the back of the can, it says that they recommend using a garden sprayer for applying the sealer.
Give The Surface A Scrub With A Stiff Bristle Brush.
You can also apply thompson’s waterseal to hardened concrete to seal out moisture. A second coat could be added if extra colour is desired. Water sealing stains are best applied with a brush.
Thompson’s Water Seal Is Then Applied And The Concrete Allowed To Dry.
Work the pad or brush in the direction of the wood grain and be sure to coat all sides, including the underside of the wood, where possible. The manufacturer of thompson water seal recommended that you use their product with a plastic sprayer with a brass wand, such as our chapin premier sprayer. After completing each area, inspect the finish for drips or pooling, and redistribute or wipe up all excess with your application tool or a clean rag.
An Instructional Video With Application Tips For Thompson's Water Seal.
Remember that a little bit goes a long way. Apply by brush, roller, dipping, or sprayer. Pour thompson's water seal into a paint tray.
Once You Are Done With The Product, It Is Recommended That You Run Mineral Spirits Through The Sprayer And Then Water To Clean It.
Apply mixture evenly onto surface using a trowel. Apply directly to damp surfaces. It's important to protect brick, concrete, or masonry surfaces that are in direct sunlight as well as shaded areas.
Post a Comment for "How To Apply Thompson's Water Seal"